High quality hydraulic equipment manufacturers!
        TELL:+8613184968882

        single rack cylinder Sold to Luxembourg

        Release time:2023-11-09 08:45:58 Hits: Current position: Home > News

        This article mainly introduces:

        Luxembourg hydraulic cylinder,single rack cylinder manufacturer,single rack cylinder

        Luxembourg single rack cylinder

        (Luxembourg single rack cylinder,produced by Hengyu Group)

        single rack cylinder are widely used in Luxembourg,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed single rack cylinder for customers from Luxembourg.

        Introduction to single rack cylinder:

        single rack cylinder piston sealing is best to use Yx ring, polyurethane and polytetrafluoroethylene sealing material combination, can significantly improve the sealing performance: (I), reduce friction resistance, no crawling phenomenon; (ii) Have good dynamic and static sealing, wear resistance, long service life; (iii) The installation groove is simple, and the disassembly is simple.

        The viscosity of the working oil used in the single rack cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

        Under normal circumstances, the single rack cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the single rack cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the single rack cylinder and the end cover, the piston and the piston rod, the piston and the single rack cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the single rack cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

        When the single rack cylinder thrust is insufficient, check the hydraulic circuit for leaks. Including leakage of valves and hydraulic lines. The inspection method is to check and eliminate the leakage of the hydraulic connection line by manipulating the reversing valve. Also consider the relief valve. If the relief valve enters the dirt and jams the spool, so that the relief valve is normally open, the hydraulic oil will flow directly back to the tank through the relief valve bypass, resulting in no oil in the single rack cylinder. If the load is too large, although the regulating pressure of the relief valve has reached the maximum rating, the single rack cylinder still cannot get the thrust required for continuous action without action. If the regulating pressure is low, the pressure is insufficient to achieve the required vertebra force, which is manifested as insufficient thrust. Check and adjust the relief valve at this time.

        Answers to some questions about single rack cylinder:

        The cylinder is moving too fast. I want to slow it down. What can I do?
        The hydraulic cylinder is the execution action, and the power source is the hydraulic system. The cylinder speed is too fast, indicating that the system flow is large, the hydraulic system has a hydraulic valve responsible for speed control function, method: 1, by adjusting the speed control valve to reduce the speed; 2, the speed control valve has been adjusted to the lowest, indicating that the hydraulic system design flow is too high, the need to re-configure the hydraulic system according to demand, or the cylinder diameter is changed.

        How to remove the air in hydraulic cylinder?
        Connected the cylinder to the system, and reciprocating move with full stroke several times, then the air can be eliminated . There is also a clunky method as follows: first remove the rod cavity oil pipe, connect the rodless cavity oil circuit to extend all the cylinders, and then remove the rodless cavity oil pipe, connect the rod cavity oil pipe and withdraw all the cylinders, and then connect the rodless cavity oil pipe, so that there is no air in the cylinder.

        Back to list Recommended article

        Leave a message if you have any questions.

        Send
        Email

        Email:hsslrubbertech@gmail.com7x24 hours

        Glad to receive your consultation!:

        Service
        Tel

        +8613184968882
        7x24hours service

        Add
        Wechat

        Add Wechat
        TOP
        亚洲区日韩区无码区| 最近中文字幕免费大全| 中文www新版资源在线| 久久久无码精品亚洲日韩京东传媒 | 无码粉嫩小泬无套在线观看 | 国产在线精品无码二区| 中文字幕乱码中文乱码51精品| 无码国产精品一区二区免费式影视| 久久99精品久久久久久hb无码| 国产中文字幕在线观看| 亚洲av无码国产精品夜色午夜| 无码中文av有码中文a| 日韩精品无码中文字幕一区二区| 亚洲中文字幕无码久久2017| 亚洲AV无码一区二区二三区入口| 中文字幕无码人妻AAA片| 亚洲AV中文无码乱人伦在线观看 | 无码人妻一区二区三区一| 精品无码一区在线观看| 炫硕日本一区二区三区综合区在线中文字幕 | 亚洲精品无码不卡在线播放HE| 中文在线天堂网WWW| 国产亚洲AV无码AV男人的天堂| a亚洲欧美中文日韩在线v日本| 99久久精品无码一区二区毛片| 成人无码区免费A片视频WWW| 乱人伦中文无码视频在线观看| 人妻无码久久一区二区三区免费 | 免费A级毛片无码A∨免费| 日韩中文字幕精品免费一区| 无码成人一区二区| 中文字幕国产第一页首页| 久久精品人妻中文系列| a级毛片无码兔费真人久久 | 无码av免费毛片一区二区| 性色欲网站人妻丰满中文久久不卡| 成人无码午夜在线观看| 成人午夜精品无码区久久| 中文字幕一区二区三区精彩视频| 日韩A无码AV一区二区三区| 无码国产福利av私拍 |