steel mill cylinder Sold to El Salvador

This article mainly introduces:

El Salvador hydraulic cylinder,steel mill cylinder manufacturer,steel mill cylinder

(El Salvador steel mill cylinder,produced by Hengyu Group）

steel mill cylinder are widely used in El Salvador，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed steel mill cylinder for customers from El Salvador.

Introduction to steel mill cylinder:

In order to ensure the service life of the steel mill cylinder, the hydraulic system must be set up effective filtration to prevent pollution, the cleanliness of the oil should meet the ISO4406 standard, and the quality of the filtration should also meet the corresponding standards in ISO. The grade requirements of the filter are performed according to the actual working conditions of the system, but the minimum requirements are not less than 19/15 in ISO4406, that is, 24μ (β10≥75) in ISO4572.

steel mill cylinders in series, parallel and series parallel. Series: In the steel mill cylinder, the oil inlet of the subsequent reversing valve is the supply of the previous oil return, and there is no separate oil return circuit connected with the oil return in each valve. Series: In the steel mill cylinder, the oil inlet of the subsequent reversing valve is the supply of the previous oil return, and there is no separate oil return circuit connected with the oil return in each valve. Parallel: the pressure oil in the steel mill cylinder is connected with the inlet oil of each reversing valve, and the return oil is collected by the return oil circuit. Series parallel: For this one, compared with the simple series and parallel, it is slightly more complicated, but it is not impossible to understand. The series refers to the oil in the steel mill cylinder, which is in series form, but can not form a series circuit, and the parallel refers to the oil return circuit of each valve, which is in parallel.

Before purchasing the steel mill cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

The steel mill cylinder is mainly composed of body, piston, piston rod, steel mill cylinder head, steel mill cylinder bottom, piston rod head and related auxiliary devices. The piston divides the steel mill cylinder into two chambers, and moves reciprocally in the steel mill cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the steel mill cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the steel mill cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the steel mill cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the steel mill cylinder bottom and the steel mill cylinder head is serious, so the buffer deceleration should be set at both ends of the steel mill cylinder The working medium of the steel mill cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; steel mill cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the steel mill cylinder: The buffer structure of the steel mill cylinder is to prevent the piston from colliding with the steel mill cylinder head at the end of the stroke.

Answers to some questions about steel mill cylinder:

Is rubber or polyurethane better for V-ring of hydraulic cylinder?
The hydraulic cylinder V-type seal ring is better with polyurethane, and chlorine rubber is used for various chemicals and high temperatures, especially when there are wear-resistant requirements, polyurethane rubber is needed. But the price of polyurethane rubber is much more expensive than the price of rubber. However, the V-ring material is most commonly used in nitrile and neoprene rubber, and natural rubber is used for sealing water and air. Butyl rubber is used for non-combustible hydraulic fluids and phosphate ester hydraulic fluids. The advantage is that the price is cheaper than the polyurethane material, and the disadvantage is that it is not wear-resistant and the anti-aging property is relatively poor.

How to disassemble the big nut that excavate the oil cylinder piston of the excavator?
If you want to be safe, look for a special unloading place for this thing, which is an oil cylinder on top of a turntable with a large nut attached to the center of the turntable. If you're in the field just pin the head of the cylinder to one end, use a big homemade wrench to hold the nut in place, and then get a digging machine and push it down, and it opens.