lifting platform cylinder Sold to Nepal

This article mainly introduces:

Nepal hydraulic cylinder,lifting platform cylinder manufacturer,lifting platform cylinder

(Nepal lifting platform cylinder,produced by Hengyu Hydraulic Co., Ltd）

lifting platform cylinder are widely used in Nepal，because of powerful torque，excellent temperature resistance，no transmission clearance.So our company has designed lifting platform cylinder for customers from Nepal.

Introduction to lifting platform cylinder:

The meaning of the lifting platform cylinder model marked by the lifting platform cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the lifting platform cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the lifting platform cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

Causes and countermeasures of oil lifting platform cylinder leakage: Cast iron ring seal allows a certain degree of internal leakage. The impurities in the lifting platform cylinder will lead to premature wear of the piston seal, replace the piston seal; If the lifting platform cylinder is visibly scarred, the lifting platform cylinder must be replaced. It can be pressurized at one end of the lifting platform cylinder and opened at the other end of the oil port to observe whether there is obvious internal leakage at the end of the oil port. Most lifting platform cylinder piston drift may not come from the lifting platform cylinder, the above method to determine the lifting platform cylinder without internal leakage is helpful to determine the problem of the hydraulic system related components.

The definition of the minimum starting pressure of the lifting platform cylinder refers to the minimum working pressure of the lifting platform cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the lifting platform cylinder parts and the size of the sealing friction.

When using the lifting platform cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the lifting platform cylinder block. If the lifting platform cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the lifting platform cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the lifting platform cylinder, so that the working efficiency of the lifting platform cylinder is reduced.

Answers to some questions about lifting platform cylinder:

How many tons can a 10mpa cylinder with a diameter of 100 hold up?
About 8 tons. Algorithm: Cylinder cross-sectional area = π* (100/2) ^2=3.14*2500=7850 square mm = 0.00785 square meters pressure = pressure * Cross-sectional area = 10000000Pa*0.00785 square meters = 78500 n mass = pressure /g = 78500 N ÷9.8 n/kg = 8010 kg = 8.01 Tons.

What is a two-way hydraulic cylinder?
Bidirectional hydraulic cylinder definition: The bidirectional hydraulic cylinder uses the oil as the working medium, transmits the movement through the change of the sealing volume, and transmits the power through the pressure inside the oil. The two-way cylinder has at least two oil ports, which are used to connect the hydraulic tubing, and control the extension and retraction of the cylinder by pressing.