500 ton hydraulic cylinder Sold to Canada

This article mainly introduces:

Canada hydraulic cylinder,500 ton hydraulic cylinder manufacturer,500 ton hydraulic cylinder

(Canada 500 ton hydraulic cylinder,produced by Hengyu Group）

500 ton hydraulic cylinder are widely used in Canada，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed 500 ton hydraulic cylinder for customers from Canada.

Introduction to 500 ton hydraulic cylinder:

The piston rod of the 500 ton hydraulic cylinder has two kinds of solid rod and hollow rod, and one end of the hollow piston rod needs to be set aside for welding and heat treatment. The solid piston rod material is 35, 45 steel, and the hollow piston rod material is 35, 45 seamless steel pipe. After rough machining, the piston rod is conditioned to 229~285HB in India, and if necessary, the hardness is 45~55HRC after high-frequency quenching.

The 500 ton hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

Factors that should be considered when selecting the oil seal in the 500 ton hydraulic cylinder: some specific factors should be taken into account when selecting the oil seal in the 500 ton hydraulic cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: 500 ton hydraulic cylinder diameter, piston rod diameter, piston rod and piston groove size, 500 ton hydraulic cylinder working pressure, 500 ton hydraulic cylinder movement speed, hydraulic system oil temperature and 500 ton hydraulic cylinder working environment.

The 500 ton hydraulic cylinder is not the same as the 500 ton hydraulic cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the 500 ton hydraulic cylinder can not be used as a high-power power component, but the 500 ton hydraulic cylinder can be used as a relatively large power component, or the 500 ton hydraulic cylinder system can be used.

Answers to some questions about 500 ton hydraulic cylinder:

How to remove the air in hydraulic cylinder?
Connected the cylinder to the system, and reciprocating move with full stroke several times, then the air can be eliminated . There is also a clunky method as follows: first remove the rod cavity oil pipe, connect the rodless cavity oil circuit to extend all the cylinders, and then remove the rodless cavity oil pipe, connect the rod cavity oil pipe and withdraw all the cylinders, and then connect the rodless cavity oil pipe, so that there is no air in the cylinder.

What is the difference between gas-hydraulic pressurized cylinder, pneumatic cylinder and oil cylinder?
The cylinder block is small and the force is large, constant speed and variable speed can be used (easy to change), the adjustment of the output is also convenient, and the freedom of transmission is high. However, maintenance costs and installation costs are high, and there is the trouble of mild oil pollution. Easy cylinder control, low price, easy access to energy. But the force is small, and can not achieve the effect of stable speed. The gas-liquid pressurized cylinder has the advantages of both of the above: environmental protection and energy saving, easy control, and simple adjustment. However, the output of the trip has certain restrictions, more suitable for short trips, large output, but also environmental protection and energy saving and low configuration of the occasion.