Release time：2023-11-12 15:27:30 Hits： Current position: Home > News
This article mainly introduces:
Spain hydraulic cylinder,press hydraulic cylinder manufacturer,press hydraulic cylinder
(Spain press hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）
press hydraulic cylinder are widely used in Spain，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed press hydraulic cylinder for customers from Spain.
The material, shape and compression of the press hydraulic cylinder seal have a great impact on the service life and work efficiency of the press hydraulic cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.
In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular press hydraulic cylinder action. Troubleshooting method: Replace the rubber hose.
In use, the press hydraulic cylinder should try to avoid the friction iron powder or iron filings formed by buffering the plunger. When the matching gap of the buffer device is small and the transverse load on the piston rod is large, the sintering phenomenon may be caused. These friction iron powder or the metal fragments that have fallen off as a result of sintering will remain in the press hydraulic cylinder.
The press hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.
What is the smallest cylinder size?
The smallest shape cylinder I have ever seen is a hydraulic clamping cylinder in the machine tool industry. Outer diameter 24 mm, total length 23 mm, travel 4 mm. Weighs 0.05 kg. Maximum clamping force 3500 Newtons.
How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.
Add Wechat