track steering cylinder Sold to Turkmenistan

This article mainly introduces:

Turkmenistan hydraulic cylinder,track steering cylinder manufacturer,track steering cylinder

(Turkmenistan track steering cylinder,produced by Hengyu Hydraulic Cylinder Factory）

track steering cylinder are widely used in Turkmenistan，because of no need for deceleration device，long service life，smooth movement.So our company has designed track steering cylinder for customers from Turkmenistan.

Introduction to track steering cylinder:

When the track steering cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the track steering cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

The main role of the track steering cylinder: the track steering cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the track steering cylinder realizes reciprocating motion. The structure of the track steering cylinder has three categories: piston track steering cylinder, plunger track steering cylinder, swing track steering cylinder, piston track steering cylinder and plunger track steering cylinder to achieve reciprocating linear motion, output speed and thrust, swing track steering cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the track steering cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The track steering cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

The oil track steering cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

Before the track steering cylinder is removed, the system should be unloaded, the loop pressure is zero, the oil source should be cut off, and the oil port should be blocked after the oil port distribution pipe is loosened.

Answers to some questions about track steering cylinder:

What adhesive should be used when the cylinder is cracked?
There is a kind of cast iron glue, industrial products market can buy, A, B formula, that is, a tube is A, a tube is B, when used proportionally prepared, check the instructions. Polish the glue after it dries, and then grind it again.

What kind of seal ring we should choose for 120Mpa hydraulic cylinder?
The sealing rings used in mining machinery are high pressure, which can reach 150MPa. It is generally composed of three parts, the guide ring, the sealing body and the elastomer. It's not a special structure. It's more mature. Usually said mountain circle, bud circle.