high pressure cylinder Sold to Kazakhstan

This article mainly introduces:

Kazakhstan hydraulic cylinder,high pressure cylinder manufacturer,high pressure cylinder

(Kazakhstan high pressure cylinder,produced by Hengyu Hydraulic Co., Ltd）

high pressure cylinder are widely used in Kazakhstan，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed high pressure cylinder for customers from Kazakhstan.

Introduction to high pressure cylinder:

Because of the slightly complex structure of the buffer high pressure cylinder, sometimes there will be problems, such as when the high pressure cylinder with the buffer device is started in reverse, the piston often stops temporarily or reverses. Elimination method: The orifice of the check valve is too small, so that the amount of oil entering the buffer chamber is too small, and even a vacuum occurs, so the above fault phenomenon will occur when the buffer plunger leaves the end cover. In this regard, the orifice of the check valve should be increased.

The high pressure cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy and does linear reciprocating motion (or swinging motion). It is simple in structure and reliable in operation. When it is used to achieve reciprocating movement, the deceleration device can be eliminated, and there is no transmission gap, and the movement is smooth, so it is widely used in various mechanical hydraulic systems. The output force of the high pressure cylinder is proportional to the effective area of the piston and the pressure difference between the two sides; The high pressure cylinder is basically composed of high pressure cylinder and high pressure cylinder head, piston and piston rod, sealing device, buffer device and exhaust device. Buffer device and exhaust device depending on the specific application, other devices are essential.

high pressure cylinder abnormal sound, hysteresis phenomenon cause and elimination method: the piston rod is extended with abnormal sound and hysteresis, if the high pressure cylinder is placed for a period of time, the high pressure cylinder may enter the air, and the movement can be normal after dozens of repeated movements. If it still cannot be eliminated, check whether the load is aligned with the axis of the piston rod; Retracted piston rod installation helps to align the load with the piston rod. If the flow is unstable, it will also lead to abnormal movement of the piston rod. Check the relevant components of the hydraulic system.

The internal leakage of the high pressure cylinder is an important indicator to measure the quality of the high pressure cylinder: the internal leakage of the high pressure cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the high pressure cylinder, so that the high pressure cylinder can not accurately and stably stop in a certain position of the high pressure cylinder, so it is one of the main indicators of the high pressure cylinder.

Answers to some questions about high pressure cylinder:

How to calculate the cylinder diameter, rod diameter and pressure of the cylinder, and how to output tonnage?
Hydraulic cylinder output force F=PAX10^3(KN) F is the output force (KN), P working pressure (MPa), A is the piston or plunger area of action.

What is the rated pressure of the general cylinder?
This depends on the model of the cylinder, 1. The rated pressure of the light tie rod cylinder is 7 series 7MPa and 14 series 14MPa. 2. Rated pressure of engineering cylinder 16MPa. 3. Rexroth type metallurgical cylinder rated pressure 250MPa.