Release time：2023-11-10 08:34:54 Hits： Current position: Home > News
This article mainly introduces:
Germany hydraulic cylinder,trailer hydraulic cylinder manufacturer,trailer hydraulic cylinder
(Germany trailer hydraulic cylinder,produced by Hebei Hengyu company）
trailer hydraulic cylinder are widely used in Germany，because of no transmission clearance，simple structure and reliable operation，excellent temperature resistance.So our company has designed trailer hydraulic cylinder for customers from Germany.
How to repair the trailer hydraulic cylinder body when it is damaged: When the trailer hydraulic cylinder has trace deformation and shallow tensile marks, the trailer hydraulic cylinder is repaired by strong honing process. The heavy honing process can repair trailer hydraulic cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the trailer hydraulic cylinder can meet the technical requirements.
Before the trailer hydraulic cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.
When the oil pressure of the trailer hydraulic cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.
The "O" ring can be used as an auxiliary seal inside the trailer hydraulic cylinder, and the elastic force of the "O" ring makes the sealing slip ring close to the sealing surface, generating sealing pressure to achieve sealing. When the internal hydraulic pressure increases, the "O" ring will further deform and squeeze the slip ring, thereby increasing the sealing pressure and improving the sealing performance. The structure has the characteristics of low friction coefficient, good wear resistance, automatic compensation for wear and absorption of hard particles in the trailer hydraulic cylinder, and can be completely sealed.
What parameters do I need to provide when purchasing hydraulic cylinders?
The main technical parameters of the hydraulic cylinder: 1. Cylinder diameter; Cylinder diameter, inner diameter size; 2. Piston rod diameter; 3. Cylinder stroke; 4. Cylinder pressure; The working pressure of the cylinder is often calculated using the test pressure, which is less than 16MPa multiplied by 1.5 and higher than 16 multiplied by 1.255. Import and export diameter and thread parameters; 6. Whether there is buffer; According to the working conditions, the piston rod extension contraction is generally buffered if the impact is large. 7. Installation method of oil cylinder, etc.
How to exhaust hydraulic cylinder?
Exhaust: The hydraulic system generally does not have exhaust, the use of the tank can exhaust, the oil operation will bring the gas back to the tank, and the tank can be communicated with the atmosphere. The gas will escape from the oil.
Add Wechat