Release time：2023-12-05 14:27:26 Hits： Current position: Home > News
This article mainly introduces:
Ecuador hydraulic cylinder,100 ton hydraulic cylinder manufacturer,100 ton hydraulic cylinder
(Ecuador 100 ton hydraulic cylinder,produced by Hebei Hengyu company）
100 ton hydraulic cylinder are widely used in Ecuador，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed 100 ton hydraulic cylinder for customers from Ecuador.
When purchasing the 100 ton hydraulic cylinder, try to clarify the following parameters of the 100 ton hydraulic cylinder: A. 100 ton hydraulic cylinder diameter, rod diameter, stroke; B. Working pressure or 100 ton hydraulic cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right 100 ton hydraulic cylinder type can be found accurately and quickly.
The material, shape and compression of the 100 ton hydraulic cylinder seal have a great impact on the service life and work efficiency of the 100 ton hydraulic cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.
100 ton hydraulic cylinder piston rod material introduction: In general, we use 45 steel to produce 100 ton hydraulic cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.
Disassembly 100 ton hydraulic cylinder: When disassembly 100 ton hydraulic cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the 100 ton hydraulic cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the 100 ton hydraulic cylinder.
How to remove the cylinder correctly?
(1) Before disassembling the hydraulic cylinder, the hydraulic circuit should be depressurized. Otherwise, when the tubing joint connected with the cylinder is loosened, the high-pressure oil in the circuit will be quickly ejected. The hydraulic circuit of the hydraulic press should first loosen the hand wheel or pressure regulator screw at the relief valve, so that the pressure oil is unloaded, and then block the power supply or block the power source to stop the operation of the hydraulic equipment. (2) When disassembling, it should prevent damage to the top thread of the piston rod, the oil thread, the appearance of the piston rod, the inner wall of the cylinder liner, etc. In order to prevent the piston rod and other slender parts from twisting or deformation, the use of cushion wood support balance when placed. (3) Disassemble in order.
The cylinder is moving too fast. I want to slow it down. What can I do?
The hydraulic cylinder is the execution action, and the power source is the hydraulic system. The cylinder speed is too fast, indicating that the system flow is large, the hydraulic system has a hydraulic valve responsible for speed control function, method: 1, by adjusting the speed control valve to reduce the speed; 2, the speed control valve has been adjusted to the lowest, indicating that the hydraulic system design flow is too high, the need to re-configure the hydraulic system according to demand, or the cylinder diameter is changed.
Add Wechat