filter hydraulic cylinder Sold to Indonesia

This article mainly introduces:

Indonesia hydraulic cylinder,filter hydraulic cylinder manufacturer,filter hydraulic cylinder

(Indonesia filter hydraulic cylinder,produced by Hengyu Group）

filter hydraulic cylinder are widely used in Indonesia，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed filter hydraulic cylinder for customers from Indonesia.

Introduction to filter hydraulic cylinder:

The difference between the plunger filter hydraulic cylinder and the piston filter hydraulic cylinder is that the piston in the filter hydraulic cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type filter hydraulic cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

The daily inspection of the filter hydraulic cylinder includes: checking the connection of the filter hydraulic cylinder and the pipe joint for leaks. Check the filter hydraulic cylinder rod for leaks. Check the filter hydraulic cylinder connection for leaks. When the filter hydraulic cylinder moves, the work is normal and smooth. Whether the filter hydraulic cylinder has internal leakage.

filter hydraulic cylinder spool stuck or valve hole blocked How to solve: When the flow valve or direction valve spool stuck or valve hole blocked, the filter hydraulic cylinder prone to misoperation or action failure. At this time, the contamination of the oil should be checked; Check whether dirt or colloidal deposits are stuck in the spool or blocking the valve hole; Check the wear of the valve body, clean and replace the system filter, clean the fuel tank, and replace the hydraulic medium.

When the filter hydraulic cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the filter hydraulic cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

Answers to some questions about filter hydraulic cylinder:

Why are two cylinders not balanced with the balance valve?
Balancing valve is only suitable for occasions with low synchronous accuracy requirements, and proportional valves are recommended for occasions with high precision requirements.

Where is the cylinder used? What is it used for? Can it be used in cars?
Cylinders can be used as actuator in hydraulic system. Such as hydraulic jacks, dump truck box lifting device, dodging (snow) machine loader bucket lifting device. Hydraulic cylinders are also widely used in car cranes. It's all about cars.