High quality hydraulic equipment manufacturers!
        TELL:+8613184968882

        track steering cylinder Sold to Korea

        Release time:2023-12-01 11:06:39 Hits: Current position: Home > News

        This article mainly introduces:

        Korea hydraulic cylinder,track steering cylinder manufacturer,track steering cylinder

        Korea track steering cylinder

        (Korea track steering cylinder,produced by Hengyu Hydraulic Cylinder Factory)

        track steering cylinder are widely used in Korea,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed track steering cylinder for customers from Korea.

        Introduction to track steering cylinder:

        When the track steering cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the track steering cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil track steering cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical track steering cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the track steering cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

        If it is found that the track steering cylinder lubrication is poor or the track steering cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the track steering cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the track steering cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the track steering cylinder center line. In this way, when the piston works in the track steering cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the track steering cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

        Disassembly track steering cylinder: When disassembly track steering cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the track steering cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the track steering cylinder.

        When purchasing the track steering cylinder, try to clarify the following parameters of the track steering cylinder: A. track steering cylinder diameter, rod diameter, stroke; B. Working pressure or track steering cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right track steering cylinder type can be found accurately and quickly.

        Answers to some questions about track steering cylinder:

        How to remove the air in hydraulic cylinder?
        Connected the cylinder to the system, and reciprocating move with full stroke several times, then the air can be eliminated . There is also a clunky method as follows: first remove the rod cavity oil pipe, connect the rodless cavity oil circuit to extend all the cylinders, and then remove the rodless cavity oil pipe, connect the rod cavity oil pipe and withdraw all the cylinders, and then connect the rodless cavity oil pipe, so that there is no air in the cylinder.

        Do the collecting cylinder, distributing cylinder and distributing cylinder on the organic heat carrier boiler need to be notified separately as the pressure vessel for construction?
        Do not need to be installed as a separate pressure vessel to inform, according to the organic heat carrier boiler can be informed. Write a "special equipment installation, renovation and maintenance notice" issued on it.

        Back to list Recommended article

        Leave a message if you have any questions.

        Send
        Email

        Email:hsslrubbertech@gmail.com7x24 hours

        Glad to receive your consultation!:

        Service
        Tel

        +8613184968882
        7x24hours service

        Add
        Wechat

        Add Wechat
        TOP
        亚洲国产精品成人精品无码区 | 少妇人妻无码精品视频app| 久久人妻无码中文字幕| 色窝窝无码一区二区三区成人网站| 日韩中文字幕电影| 精品无码国产自产拍在线观看蜜| 中文字幕无码精品亚洲资源网久久| 久久久噜噜噜久久中文福利| 99久久精品无码一区二区毛片| 永久免费av无码网站yy| 精品久久久无码中文字幕| 影院无码人妻精品一区二区| 久久亚洲精品成人av无码网站| 熟妇人妻中文a∨无码| 中文字幕在线观看亚洲| 中文字幕人妻无码系列第三区| 成?∨人片在线观看无码| 无码GOGO大胆啪啪艺术| 亚洲级αV无码毛片久久精品| 一区二区三区在线观看中文字幕 | 亚洲乱码中文字幕综合| 精品无码综合一区| yy111111少妇影院里无码| 亚洲AV无码精品色午夜在线观看| 特级做A爰片毛片免费看无码 | 麻豆AV无码精品一区二区| 日本一区二区三区不卡视频中文字幕| 佐藤遥希在线播放一二区| 亚洲爆乳精品无码一区二区| 毛片免费全部无码播放| 精品无码三级在线观看视频| 日韩美无码五月天| 人妻少妇看A偷人无码精品| 久久久无码精品亚洲日韩软件| 久久久精品无码专区不卡 | 日韩乱码人妻无码中文字幕视频| 黑人无码精品又粗又大又长| 天天看高清无码一区二区三区| 天堂无码在线观看| 亚洲AV区无码字幕中文色 | 中文字幕在线观看一区二区|