High quality hydraulic equipment manufacturers!
        TELL:+8613184968882

        single rack cylinder Sold to Pakistan

        Release time:2023-11-30 10:59:59 Hits: Current position: Home > News

        This article mainly introduces:

        Pakistan hydraulic cylinder,single rack cylinder manufacturer,single rack cylinder

        Pakistan single rack cylinder

        (Pakistan single rack cylinder,produced by Hengyu Hydraulic Cylinder Factory)

        single rack cylinder are widely used in Pakistan,because of excellent fatigue and impact resistance,no need for deceleration device,long service life.So our company has designed single rack cylinder for customers from Pakistan.

        Introduction to single rack cylinder:

        The difference between the plunger single rack cylinder and the piston single rack cylinder is that the piston in the single rack cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type single rack cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

        When the initial action of the single rack cylinder is slow, please check the temperature of the hydraulic system, because in the case of low temperature, the viscosity of the hydraulic oil is large and the fluidity is poor, resulting in slow action of the single rack cylinder. The improvement method is to replace the hydraulic oil with good viscosity temperature performance, and the oil temperature at low temperature can be increased by heater or heating by the machine itself, and the normal working oil temperature of the system should be maintained at about 40 ° C.

        At the rated pressure, the thrust of the single rack cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the single rack cylinder is related to the diameter of the single rack cylinder, but not to the stroke of the single rack cylinder. Moreover, the larger the single rack cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the single rack cylinder.

        The meaning of the single rack cylinder model marked by the single rack cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the single rack cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the single rack cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

        Answers to some questions about single rack cylinder:

        What components can control cylinder rising and falling speed and the speed is adjustable?
        A throttle or special solenoid valve is required. The reversing valve can choose the three-position reversing valve with P-type middle function. When rising, the reversing valve can be changed to the middle position to achieve differential connection and the fastest speed. Add a combination valve one-way throttle valve in the oil return circuit, connection mode: when the cylinder rises, the oil flows back to the tank through the check valve, the throttle valve is reversed off, when the cylinder falls, the reversing valve is changed to the left or right position (see the structure of the valve), the check valve is reversed off, the oil returns to the tank through the throttle valve, and the speed can be adjusted through the throttle valve.

        What is the difference between hydraulic piston cylinder and plunger cylinder?
        The force surface of the piston cylinder is a rod cavity and a rodless cavity, and the force surface of the plunger cylinder is the plunger, the spring return single-acting piston cylinder can also rely on the external force of the spring to achieve return, the double-acting piston cylinder can produce tension, and the plunger cylinder only produces thrust without tension.

        Back to list Recommended article

        Leave a message if you have any questions.

        Send
        Email

        Email:hsslrubbertech@gmail.com7x24 hours

        Glad to receive your consultation!:

        Service
        Tel

        +8613184968882
        7x24hours service

        Add
        Wechat

        Add Wechat
        TOP
        中文字幕视频一区| 中文字幕av无码一区二区三区电影 | 人妻夜夜添夜夜无码AV| 亚洲人成影院在线无码观看| 一二三四在线观看免费中文在线观看 | 亚洲一区二区三区无码中文字幕| 本免费AV无码专区一区| 亚洲不卡无码av中文字幕| 日韩欧国产精品一区综合无码| 欧美日韩中文字幕在线| 久久精品国产亚洲AV无码麻豆 | 亚洲中文字幕无码中文字在线| 免费无码国产在线观国内自拍中文字幕| 日韩中文字幕视频| 狠狠躁狠狠躁东京热无码专区| 区三区激情福利综合中文字幕在线一区 | 亚洲中久无码不卡永久在线观看 | 99久久无色码中文字幕人妻| 亚洲人成无码网站在线观看| 亚洲中文字幕久久精品无码APP | 中文字幕无码不卡在线| 亚洲AV无码乱码国产麻豆穿越| 中文字幕人妻丝袜乱一区三区 | 国产中文欧美日韩在线| 国产精品无码久久久久| 亚洲AV综合色区无码一区| 国产精品亚洲w码日韩中文| 无码毛片一区二区三区视频免费播放| 精品无码一区二区三区电影| 亚洲欧美日韩中文久久| AV无码一区二区大桥未久| 曰韩精品无码一区二区三区 | 中文无码伦av中文字幕| av无码国产在线看免费网站| 亚洲VA中文字幕无码一二三区| 色综合久久精品中文字幕首页| 久久亚洲AV无码西西人体| 国产精品无码久久综合| 亚洲av无码片vr一区二区三区| 中文字幕欧美日本亚洲| 中文字幕在线最新在线不卡|