die cast hydraulic cylinder Sold to Turkey

This article mainly introduces:

Turkey hydraulic cylinder,die cast hydraulic cylinder manufacturer,die cast hydraulic cylinder

(Turkey die cast hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）

die cast hydraulic cylinder are widely used in Turkey，because of excellent fatigue and impact resistance，no need for deceleration device，long service life.So our company has designed die cast hydraulic cylinder for customers from Turkey.

Introduction to die cast hydraulic cylinder:

The quality of the die cast hydraulic cylinder can not be ignored in the purchase of the die cast hydraulic cylinder. The die cast hydraulic cylinder is the main component of the die cast hydraulic cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. die cast hydraulic cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of die cast hydraulic cylinder is deep hole processing, which has always troubled the processing personnel.

After the die cast hydraulic cylinder is installed, lubricating grease should be added to the relative moving parts such as earring and middle hinge shaft before trial operation.

When the long-stroke die cast hydraulic cylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in die cast hydraulic cylinder head seal damage, oil leakage, and piston sleep in the die cast hydraulic cylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the die cast hydraulic cylinder; The piston and the piston rod are connected with a spherical joint.

The commonly used buffer structure of the die cast hydraulic cylinder is composed of a piston boss and a die cast hydraulic cylinder head groove. When the piston moves close to the die cast hydraulic cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

Answers to some questions about die cast hydraulic cylinder:

How many kilograms can the 63 cylinder hold?
The force of the cylinder is related to the cylinder diameter and pressure. 63 cylinder diameter (cylinder inner circle diameter), 21MPA pressure, thrust 6 tons.

Hydraulic cylinder load algorithm?
If it is thrust, load = working pressure x piston area. If it is pulling force, load = working pressure x(piston area - piston rod area).