shearing machine cylinder Sold to Britain

This article mainly introduces:

Britain hydraulic cylinder,shearing machine cylinder manufacturer,shearing machine cylinder

(Britain shearing machine cylinder,produced by Hengyu Group）

shearing machine cylinder are widely used in Britain，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed shearing machine cylinder for customers from Britain.

Introduction to shearing machine cylinder:

shearing machine cylinder piston rod material introduction: In general, we use 45 steel to produce shearing machine cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

The shearing machine cylinder should be used correctly and maintained regularly. The shearing machine cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the shearing machine cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

When using the shearing machine cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the shearing machine cylinder block. If the shearing machine cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the shearing machine cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the shearing machine cylinder, so that the working efficiency of the shearing machine cylinder is reduced.

If the seal of the shearing machine cylinder is abnormal wear, you can check whether the speed control valve is improperly adjusted, resulting in too high back pressure and improper installation of the seal or hydraulic oil contamination. The second is whether there is a foreign body entering the assembly and the quality of the sealing material is not good. The result is that the action is slow and weak, and in serious cases, it will cause damage to the piston and shearing machine cylinder, and the phenomenon of "pulling the shearing machine cylinder" appears. The treatment method is to adjust the speed control valve, and the necessary operation and improvement should be done according to the installation instructions.

Answers to some questions about shearing machine cylinder:

How many tons is the oil cylinder 16mpa?
It depends on the cross-sectional area of the cylinder A(mm2)F=16mpa×A unit is (tons).

In hydraulic equipment, is the motor power related to the cylinder pressure holding time?
Irrelevant. The motor only drives the plunger in the hydraulic cylinder of the oil pump to extend out, and stops when the set pressure is reached; The length of the pressure holding time is related to the sealing degree of the hydraulic cylinder and the solenoid valve.