sanitation truck hydraulic cylinder Sold to France

This article mainly introduces:

France hydraulic cylinder,sanitation truck hydraulic cylinder manufacturer,sanitation truck hydraulic cylinder

(France sanitation truck hydraulic cylinder,produced by Hebei Hengyu company）

sanitation truck hydraulic cylinder are widely used in France，because of powerful torque，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed sanitation truck hydraulic cylinder for customers from France.

Introduction to sanitation truck hydraulic cylinder:

The sanitation truck hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

When the oil pressure of the sanitation truck hydraulic cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

Factors that should be considered when selecting the oil seal in the sanitation truck hydraulic cylinder: some specific factors should be taken into account when selecting the oil seal in the sanitation truck hydraulic cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: sanitation truck hydraulic cylinder diameter, piston rod diameter, piston rod and piston groove size, sanitation truck hydraulic cylinder working pressure, sanitation truck hydraulic cylinder movement speed, hydraulic system oil temperature and sanitation truck hydraulic cylinder working environment.

The difference between the integral sanitation truck hydraulic cylinder and the split sanitation truck hydraulic cylinder: The integral sanitation truck hydraulic cylinder and the split sanitation truck hydraulic cylinder in the sanitation truck hydraulic cylinder are two different sanitation truck hydraulic cylinders, and they are very different. The whole sanitation truck hydraulic cylinder, which is cast in one body, is not prone to problems such as oil leakage; The split sanitation truck hydraulic cylinder is welded twice, so if it is not handled well at the welding, it is prone to problems such as oil leakage and sanitation truck hydraulic cylinder damage. Therefore, it is obvious that the answer to this question is for difference.

Answers to some questions about sanitation truck hydraulic cylinder:

The difference between the overall cylinder and the separate cylinder of the truck?
The whole cylinder is cast in one piece, and such a cylinder generally does not leak oil. Split cylinder refers to two welded, easy to leak oil in the welding place, resulting in damage to the cylinder, or its body can not get up, many people do not use this kind of cylinder now.

What is the meaning of cylinder HSGK01-100/70E-4111-1320?
hsg Double acting single piston rod hydraulic cylinder and front end cover are connected by internal clamp key 01 Design serial number 100 cylinder inner diameter 70 piston rod outer diameter e Pressure class code 16mpa4111 Front flange, rod end external thread, both ends with buffer, oil port connection is internal thread 1320 stroke.