High quality hydraulic equipment manufacturers!
        TELL:+8613184968882

        rack cylinder Sold to Angola

        Release time:2023-11-13 11:19:26 Hits: Current position: Home > News

        This article mainly introduces:

        Angola hydraulic cylinder,rack cylinder manufacturer,rack cylinder

        Angola rack cylinder

        (Angola rack cylinder,produced by Hengyu Group)

        rack cylinder are widely used in Angola,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed rack cylinder for customers from Angola.

        Introduction to rack cylinder:

        The advantages and disadvantages of the rack cylinder: the surface of the rack cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the rack cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

        When the rack cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the rack cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

        rack cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

        How the cavitation of the rack cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the rack cylinder, resulting in corrosive damage to the parts.

        Answers to some questions about rack cylinder:

        How to repair if hydraulic shears cylinder oil leakage?
        The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.

        What is the reason for the hydraulic cylinder sticking out and not retracting?
        There are two reasons: First, the problem with the seal, if there are two seals on the piston, the top seal is broken. Second, when the hydraulic pressure itself is designed, the rod cavity area is too small, so that the desired return force can not be achieved during the return trip. You can first check whether the coupling is damaged; Then see if the relief valve in the oil line block is blocked. If the use time is too long, it needs to be cleaned, the hydraulic oil is very dirty and can block oil block. Electromagnetic directional valves can also be checked, but the chance of problems is relatively small, unless there is a product problem.

        Back to list Recommended article

        Leave a message if you have any questions.

        Send
        Email

        Email:hsslrubbertech@gmail.com7x24 hours

        Glad to receive your consultation!:

        Service
        Tel

        +8613184968882
        7x24hours service

        Add
        Wechat

        Add Wechat
        TOP
        亚洲中文久久精品无码ww16| 亚洲福利中文字幕在线网址| 国产亚洲精久久久久久无码| 欧美日韩亚洲中文字幕一区二区三区| 久久久久亚洲精品中文字幕 | 手机永久无码国产AV毛片 | 欧美日韩中文字幕| 色综合中文综合网| 国产高清无码毛片| 亚洲欧美精品一区久久中文字幕| 无码精品人妻一区| 天堂在线观看中文字幕| 无码精品国产dvd在线观看9久| 日本中文字幕免费看| 亚洲Av综合色区无码专区桃色| 亚洲精品一级无码中文字幕| 最近中文字幕2019视频1| 免费无码成人AV在线播放不卡| 国产品无码一区二区三区在线 | 中文在线最新版天堂bt| 亚洲av永久无码精品秋霞电影影院| 亚洲精品无码专区久久同性男| 一本大道无码日韩精品影视| 国产亚洲美日韩AV中文字幕无码成人| 国产精品综合专区中文字幕免费播放| 无码国产午夜福利片在线观看| 国产成人精品无码免费看| 少妇无码太爽了在线播放| 中文无码久久精品| 中文字幕亚洲综合久久2| 国产乱人无码伦av在线a| 无码精品久久一区二区三区| 日韩中文字幕在线| 亚洲va中文字幕无码久久| 中文在线天堂网WWW| 日韩乱码人妻无码中文字幕视频| 亚洲精品无码不卡在线播HE| 国色天香中文字幕在线视频 | 人妻丰满av无码中文字幕| 无码精品日韩中文字幕| 无码精品久久久天天影视|