High quality hydraulic equipment manufacturers!
        TELL:+8613184968882

        lift cylinder Sold to Ecuador

        Release time:2023-11-12 15:31:18 Hits: Current position: Home > News

        This article mainly introduces:

        Ecuador hydraulic cylinder,lift cylinder manufacturer,lift cylinder

        Ecuador lift cylinder

        (Ecuador lift cylinder,produced by Hebei Hengyu company)

        lift cylinder are widely used in Ecuador,because of excellent temperature resistance,no transmission clearance,powerful torque.So our company has designed lift cylinder for customers from Ecuador.

        Introduction to lift cylinder:

        Because of the slightly complex structure of the buffer lift cylinder, sometimes there will be problems, such as when the lift cylinder with the buffer device is started in reverse, the piston often stops temporarily or reverses. Elimination method: The orifice of the check valve is too small, so that the amount of oil entering the buffer chamber is too small, and even a vacuum occurs, so the above fault phenomenon will occur when the buffer plunger leaves the end cover. In this regard, the orifice of the check valve should be increased.

        In order to ensure the service life of the lift cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the lift cylinder, causing damage to the seal and causing leakage in the lift cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

        If air enters the hydraulic system, the lift cylinder will not operate normally, mainly because there is a leak in the system. At this time, check the liquid level of the hydraulic tank, the seals and fittings on the oil suction side of the hydraulic pump, and whether the oil suction filter is too dirty. If so, the hydraulic oil should be replenished, seals and fittings should be treated, and the coarse filter element should be cleaned or replaced.

        The main role of the lift cylinder: the lift cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the lift cylinder realizes reciprocating motion. The structure of the lift cylinder has three categories: piston lift cylinder, plunger lift cylinder, swing lift cylinder, piston lift cylinder and plunger lift cylinder to achieve reciprocating linear motion, output speed and thrust, swing lift cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the lift cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The lift cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

        Answers to some questions about lift cylinder:

        What are the main dimensions of the cylinder?
        The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

        Why are the hydraulic cylinders out of sync? The reasons for the unsynchronous operation are as follows: 1, the deviation of the external load of the two cylinders, such as the different resistance and friction of the two cylinders will lead to imbalance. The displacement of the cylinder with low resistance will be larger. 2, the difference in internal friction, such as the difference between the piston and the cylinder of each cylinder, the friction between the piston rod and the seal causes the cylinder to be out of sync. 3. The different resistance of hydraulic oil along the pipeline of the two cylinders causes the cylinder to be out of sync. 4, the deviation of the control original adjustment causes the deviation of the flow to be out of sync, such as the use of an independent throttle valve for each cylinder will appear the difference in the flow of oil in and out of the oil affecting the synchronization of the two cylinders. 5. The cylinder support point of the supported part is initially different.

        Back to list Recommended article

        Leave a message if you have any questions.

        Send
        Email

        Email:hsslrubbertech@gmail.com7x24 hours

        Glad to receive your consultation!:

        Service
        Tel

        +8613184968882
        7x24hours service

        Add
        Wechat

        Add Wechat
        TOP
        日韩免费无码一区二区三区| 亚洲欧美日韩中文字幕一区二区三区 | 国产成人亚洲综合无码| 亚洲乱亚洲乱少妇无码| 亚洲看片无码在线视频| 精品无码AV无码免费专区| 精品久久人妻av中文字幕| 在线播放无码后入内射少妇| 中文无码熟妇人妻AV在线| 中出人妻中文字幕无码| 最近的中文字幕在线看视频 | 一本无码中文字幕在线观| 国产无码一区二区在线| 亚洲色无码播放| 中文无码vs无码人妻| 亚洲A∨无码一区二区三区| 精品一区二区三区中文字幕| 国产AV一区二区三区无码野战| 久草中文在线观看| 久久久精品人妻无码专区不卡 | 免费无码成人AV在线播放不卡| 中文字幕一区视频| 亚洲äv永久无码精品天堂久久 | 亚洲中文字幕无码中文字在线| 无码人妻久久一区二区三区免费丨| 亚洲AV中文无码字幕色三| 成人av片无码免费天天看| 人妻系列AV无码专区| 日韩欧群交P片内射中文| 成人精品一区二区三区中文字幕| 午夜亚洲AV日韩AV无码大全| 久久国产三级无码一区二区| 亚洲乱码中文字幕综合| 无码午夜成人1000部免费视频 | 午夜无码视频一区二区三区| 国产丝袜无码一区二区三区视频 | 无码国产福利av私拍| 最近中文字幕在线中文高清版 | 精品久久久久中文字| 乱人伦人妻中文字幕无码| 少妇无码AV无码专区线|