swager cylinder Sold to Bahrain

This article mainly introduces:

Bahrain hydraulic cylinder,swager cylinder manufacturer,swager cylinder

(Bahrain swager cylinder,produced by Hengyu Hydraulic Co., Ltd）

swager cylinder are widely used in Bahrain，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed swager cylinder for customers from Bahrain.

Introduction to swager cylinder:

In order to ensure the service life of the swager cylinder, the medium used must not be mixed with impurities and stolen goods, so as to avoid scratching the inner arm of the swager cylinder, causing damage to the seal and causing leakage in the swager cylinder. It is required that the filtration accuracy of the system is not less than 80μm, the oil pollution is strictly controlled, the hydraulic oil is kept clean, the performance of the hydraulic oil is regularly checked, and the necessary fine filtration or replacement of the new working hydraulic oil is carried out.

The swager cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

In the process of using the swager cylinder, sometimes such a problem will occur, the swager cylinder can not act immediately after the instruction of the swager cylinder action is issued, and it must be moved after a short time, or sometimes it can move and stop moving, showing that the operation is very irregular. The cause and elimination of this failure mainly include air in the oil swager cylinder. Elimination method: exhaust through the exhaust valve. Check the piston rod reciprocating parts of the sealing ring for air inhalation, if so, replace the sealing ring.

Disassembly swager cylinder: When disassembly swager cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the swager cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the swager cylinder.

Answers to some questions about swager cylinder:

What's a minus 40 cylinder made of?
Construction with 1Cr18Ni9Ti, in low temperature conditions impact and tensile strength are very good, can withstand -100 degrees of low temperature, corrosion resistance, material price is not very high, more economic.

How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.