servo hydraulic cylinder Sold to Cameroon

This article mainly introduces:

Cameroon hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

(Cameroon servo hydraulic cylinder,produced by Hebei Hengyu company）

servo hydraulic cylinder are widely used in Cameroon，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed servo hydraulic cylinder for customers from Cameroon.

Introduction to servo hydraulic cylinder:

The servo hydraulic cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

When installing the servo hydraulic cylinder pipe, the pipe should be cleaned after installation, and should not pass through the servo hydraulic cylinder block, and the by-pass pipe must be installed in front of the oil port of the servo hydraulic cylinder block. This is important. Otherwise, the foreign body in the pipeline will enter the servo hydraulic cylinder, and once it enters, it is difficult to exclude it, but it becomes a foreign body transported to the servo hydraulic cylinder. Moreover, when cleaning, the removal method of foreign bodies entered in the installation pipeline operation should be considered. In addition, the corrosion in the pipe should be pickling and other procedures before the pipe installation, and the rust must be completely removed.

The servo hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

The pressure of the sliding surface of the servo hydraulic cylinder piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the servo hydraulic cylinder must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

Answers to some questions about servo hydraulic cylinder:

Does the excavator use a hydraulic cylinder?
First, construction machinery is generally a hydraulic cylinder. Second, hydraulic transmission equipment is usually composed of four components, power, execution, control and auxiliary. And the hydraulic cylinder as a linear reciprocating motion or less than 360. Reciprocating motion of the hydraulic mechanism, simple structure, reliable work, is also widely used in the hydraulic system of the main actuator, it is the prime mover in the form of mechanical energy to drive the hydraulic pump produced by the liquid pressure energy, and then can be directly driven load for reciprocating movement or less than 360.

How to control the speed of the hydraulic cylinder?
The speed of the hydraulic cylinder is only related to the flow, so the control speed is to control the flow of the hydraulic oil, which is generally adjusted by the throttle valve in the system.