lift cylinder(lift cylinder,produced by Hengyu Hydraulic Cylinder Factory）lift cylinder are widely used ，because of smooth movement，high work efficiency，e
(lift cylinder,produced by Hengyu Hydraulic Cylinder Factory）
lift cylinder are widely used ，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed lift cylinder for our customers.
When the long-stroke lift cylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in lift cylinder head seal damage, oil leakage, and piston sleep in the lift cylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the lift cylinder; The piston and the piston rod are connected with a spherical joint.
When the piston speed of the lift cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the lift cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.
Do not enter foreign bodies when installing the lift cylinder block. The place where the installation operation is carried out, the conditions are not good, and foreign bodies can be entered unconsciously. Therefore, the installation site must be cleaned up around, especially the place where the parts are placed must be cleaned, so that there is no dirt.
The meaning of the lift cylinder model marked by the lift cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the lift cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the lift cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.
How does the self-locking cylinder work?
Hydraulic cylinder self-locking is divided into oil self-locking and mechanical self-locking. The oil circuit itself is equipped with a valve to maintain pressure, so that the hydraulic oil of the cylinder does not return to the tank, and the oil chamber of the cylinder is filled with a certain pressure of oil. However, this pressure holding self-locking is not very safe and reliable, and the plunger will slowly return if there is a leak. Mechanical self-locking is to install a nut on the plunger of the cylinder, and when the cylinder rises to the required position, the nut on the cylinder plunger is rotated to the end, and the cylinder block is in contact, so that the plunger will be fixed to the required height. When it is necessary to relieve the pressure, screw the nut on again and let the plunger return to the position. This kind of cylinder has a special name, called self-locking hydraulic cylinder.
Design a hydraulic cylinder, the inner diameter of the cylinder is 100mm, what size of piston rod is best used?
This involves how much speed ratio you need, that is, the area ratio of the rod cavity and the rodless cavity, if the weight is relatively large, it is recommended that the speed ratio choose 2, that is, the piston rod diameter choose 70mm, under normal circumstances, the speed ratio choose 1.46, the piston rod diameter choose 55mm. Of course, there are many factors that affect the diameter of the piston rod, such as stroke, stroke is too long, in order to stabilize the work of the hydraulic cylinder, its diameter also needs to choose a relatively large, sometimes even non-standard products, need to choose according to the actual situation.
Add Wechat